background image

Central remote controller

Owner’s Manual

43

-EN

Setting item list

Schedule editing

9

Move the cursor using [<] and [>], and set the time using [

and [

].

10

Select an item using [<] and [>], change the setting using [

and [

], and then press [ ] (Confirm).

The “Weekly Schedule” screen is displayed again, with the set 
schedule added to the list.
• If you press [

] (Return) without pressing [

] (Confirm), the setting 

is cancelled and the screen returns to the state it was in before the 
change was made.

• For details of the setting of each item, see “Setting item list”.

5 6

4

3

2

1

No.

Item

Description

1

Setting target

Change the control target using [

] and [

].

2

Time

Change the time using [

] and [

].

 

NOTE

If the time is not set, you cannot set ON/OFF, set temperature, operation mode, or key lock.

3

ON/OFF

You can change ON/OFF using [

] and [

].

 

NOTE

If you set “--”, the last state is maintained.

4

Set temperature

You can change the set temperature using [

] and [

].

 

NOTE

If you set “--”, the last set temperature is maintained to continue the operation.

5

Operation mode

You can change the operation mode to the following, using [

] and [

].

 

NOTE

The operation modes that cannot be set are not displayed.

6

Key lock

You can change the key lock to the following, using [

] and [

].

 

NOTE

If the Local Control Mode is set, you cannot set key lock.

HEAT

COOL

Icon

Setting items

Function prohibited for remote control

ON/OFF

Operation 

Mode

Set 

temperature

--

The last lock state is maintained.

Unlock

-

-

-

Lock 1

-

-

Lock 2

Lock 3

-

Lock 4

-

-

Summary of Contents for TCB-SC640U-E




































































Reviews: