Toshiba TCB-SC640U-E Owner'S Manual Download

Page: 6 / 67

Central remote controller

Owner’s Manual

-EN

Installation Precautions

Usage Precautions

CAUTION

Check the

installation

location

Do not install in areas with high humidity or
vibration.

Doing so may cause a failure.

Check the

installation

location

Do not install in direct sunlight or near heat
sources.

Doing so may cause a failure.

Check the

installation

location

Do not install in areas where noise is
generated.

Doing so may cause malfunction.

Check the

installation

location

Do not install this product in a place where
combustible gas may leak.

Gas leaking and accumulating around the
product may cause a fire.

Check the

installation

location

Do not use this device in locations where
children may be present.

Prohibited

Do not drop the product or apply strong
shock.

Doing so may cause a failure.

If anything

is abnormal

turn off the

power

If this product malfunctions, turn off the
original power supply, and then contact the
dealer from whom you purchased the
product to ask for repair.

Continued operation with an abnormality may
cause fire or electric shock.

Instructions

When cleaning and checking, turn off the
earth leakage breaker.

Failing to do so may cause injury.

Summary of Contents for TCB-SC640U-E




































































Search results

Summary of Contents for TCB-SC640U-E

Reviews:

Related manuals for TCB-SC640U-E

Brands by name

Popular brands

Toshiba TCB-SC640U-E, Owner'S Manual

Search results

Summary of Contents for TCB-SC640U-E

Reviews:

Related manuals for TCB-SC640U-E

Brands by name

Popular brands