37
If you experience any of the following difficulties while using this unit, check the list below before consulting
your nearest TOSHIBA dealer.
Problem:
The unit does not respond to the
remote control.
Incorrect or no audio / video signal
on the amplifier/display device via
HDMI
TM
cable.
No sound or picture
No power
Completely distorted picture or black/
white picture with Blu-ray Disc™/
DVD.
No 3D effectiveness.
The unit does not respond to
some operating commands during
playback.
Picture freezes momentarily during
playback.
Solution:
Aim the remote control directly at infrared sensor window on the front
panel.
Reduce the distance to infrared sensor window.
Replace the batteries in the remote control.
Re-insert the batteries with their polarities (+ / - signs) as indicated.
If the unit is connected to the unauthorized display device with an HDMI
TM
cable, the audio/video signal may not be output.
Ensure the amplifier/display devices setting match the Symbio
TM
Media Box
and Blu-ray
TM
Player.
Check if the connected TV is turned on.
Check if the connections are made securely and correctly.
Check whether the connected TV or other device supports HDCP. (This unit
will not output a video signal unless the other device supports HDCP.)
Check whether the output format of this unit (HDMI
TM
FORMAT) matches
the supported input format of other connected device.
Check if the AC adapter is properly connected.
Unplug the AC adapter once, and wait for approximately 5-10 seconds and
then plug it in again.
Make sure the disc is compatible with this unit.
Set Blu-ray 3D Mode to Auto.
Connecting to a 3D TV.
Playback a 3D disc.
Wear 3D glasses.
Operations may not be permitted by the disc.
Refer to the instructions of the disc.
Check the disc for fingerprints/scratches and clean with a soft cloth wiping
from center to edge.
Clean the disc.
No sound or distorted sound
Adjust the volume.
Check if speakers are connected correctly.
Check the HDMI
TM
connections.
Check the settings in the Audio menu.
Troubleshooting
Troubleshooting
Buttons do not work or the unit stops
responding.
Distorted picture
To completely reset the unit, unplug the AC adapter from the outlet for
approximately 5-10 seconds.
Sometimes a small amount of picture distortion may appear. This is not a
malfunction.
Connect this unit directly to the TV.
