17
Connecting to your home network
Using a wired network provides the best performance because the attached device and player are
connected directly to the network and are not subject to radio frequency interference.
To use a wireless connection, you can connect through the built-in wireless device and a wireless access
point or router.
Your Symbio™ Media Box and Blu-ray Disc™ Player can be connected to your home network:
Connect the network cable from the LAN jack on the player to the LAN jack on the network system’s hub or
broadband router.
Connecting via wired router
Do not connect a modular phone cable to the LAN jack.
Because there are various connection configurations, follow the instructions from your
telecommunication carrier or Internet service provider.
(Sample Illustration) Connecting to a wired router
hub or broadband router
LAN cable (not supplied)
Symbio
TM
Media Box and Blu-ray Disc
TM
Player connections
Your Symbio™ Media Box and Blu-ray Disc
TM
player has an integrated Wi-Fi
®
device and antenna. No
physical connection to the wireless router is necessary.
For detailed connection instructions for your Symbio™ Media Box and Blu-ray Disc™ player,
see “Connecting
to your home network” on this page
1. Configure your player to access the wireless access point or router.
2. The network configuration and connection method may vary depending on the equipment in use and
the network environment. Your Symbio™ Media Box and Blu-ray Disc
TM
player is equipped with an
IEEE 802.11n wireless module, which also supports the 802.11a/b/g/n standards. For the best wireless
performance, we recommend using an IEEE 802.11n Wi-Fi
®
CERTIFIED network (access point or wireless
router).
Wireless access point
Connecting via the built-in Wi-Fi
®
device and a wireless access point
or router
(Sample Illustration) Connecting to a wireless router
