Toshiba SD-V280 Owner'S Manual Download Page 42

Page: 42 / 76

Basic playback (DVD)

Playing a disc

This section shows you the basics on how to play a disc.

CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.

Basic playback

Preparations:
• When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD/VCR. This

may include S-Video on component video inputs which are exclusive to DVD playback.

• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected

to the DVD/VCR.

To start playback in the stop mode
Press PLAY.

Press the power button (I /

The DVD/VCR turns on.

Press DVD/VCR to select the DVD mode.

The DVD indicator will light.

Press OPEN/CLOSE.

The disc tray opens.

Place the disc on the disc tray.

With the playback
side down

• There are two different disc sizes. Place the disc in

the correct guide on the disc tray. If the disc is out of
the guide, it may damage the disc and cause the
DVD/VCR to malfunction.

• Do not place a disc which is unplayable in this DVD/

VCR.

DVD
VCD

3, 5

Display window

STOP PLAY

ON/STANDBY

VCR/DVD SELECT

OPEN/CLOSE

PLAY

Press OPEN/CLOSE to close the disc tray.

Playback starts.

If you insert a DVD video disc that contains a top
menu, a menu may appear. See “Locating a title
using the top menu.”

• You may need to press the TOP MENU or MENU

button to display disc menu (depending on the actual
DVD video disc.)

2A70901D (E)p42-47

1/6/2002, 22:58

Summary of Contents for SD-V280













































































Search results

Summary of Contents for SD-V280

Reviews:

Related manuals for SD-V280

Brands by name

Popular brands

Toshiba SD-V280, Owner'S Manual

Search results

Summary of Contents for SD-V280

Reviews:

Related manuals for SD-V280

Brands by name

Popular brands