27
Basic setup
Tuner setting
This DVD/VCR is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the DVD/VCR’s memory. In addition to normal
VHF and UHF channels, this DVD/VCR can receive up to 113 Cable
TV channels. To use this DVD/VCR with an antenna, set the TV/CATV
menu option to the TV mode. When shipped from the factory, this menu
option is in the CATV mode.
Press VCR MENU. Press SET + or – to select
“CH SET UP”, then press ENTER.
Preparation:
• Turn ON the TV and set to the video input mode.
• Press DVD/VCR to select the VCR mode. (The
VCR indicator will light.)
1
Press SET + or – to select “TV/CATV”.
2
〈
+/-/ENTER/MENU
〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈
+/-/ENTER/MENU
〉
MENU
TIMER REC SET
AUTO REPEAT
ON
OFF
ON
OFF
SAP
CH SET UP
SYSTEM SET UP
TV/CATV selection
Setting channels automatically
Repeat left step 1 and press SET + or – to
select “AUTO CH MEMORY”.
1
Press ENTER.
Auto tuning will begin. The channel
display will count up and when fin-
ished, the screen returns to normal.
2
〈
+/—/ENTER/MENU
〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
CH 002
Note:
You can’t select “CH SET UP” if you set the channel to “L1” or
“L2”.
Press ENTER to select the TV or CATV mode.
The arrow indicates the selected mode.
3
Press VCR MENU until the menu screen is
cleared.
4
TV - VHF/UHF channels
CATV - CABLE TV channels
〈
+/-/ENTER/MENU
〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
1-2
1, 3
1, 4
2A70901D (E)p26-37
1/6/2002, 22:57
27
