background image

1-7

PREPARA

TION

Connections (Cont

’d)

Connecting to Optional Equipment

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Surround

Connect the Left and Right 

AUDIO OUT

jacks on the

DVD Player to the audio left and right in jacks on your

amplifier

, receiver or stereo system, using the supplied

audio cables 

(A)

.

Connecting to an amplifier equipped with two

channel digital stereo (PCM) or to an 

Audio/

V

ideo receiver equipped with a multi-channel

decoder (Dolby Digital

, MPEG 2 or DTS)

1

Connect one of the DVD Player

’s DIGIT

AL

AUDIO

OUT

jacks (OPTICAL

O

or COAXIAL

X

) to the cor-

responding in jack on your amplifier

. Use an option-

al digital (optical 

O

or coaxial 

X

) audio cable.

2

Y

ou will need to activate the player

’s digital output.

(See 

“Digital Audio 

Output

” on page 14).

Digital Multi-channel sound

A

digital multi-channel connection provides the best

sound quality

. For this you need a multi-channel

Audio/V

ideo receiver that supports one or more of the

audio formats supported by your DVD Player (MPEG 2,

Dolby Digital and DTS). Check the receiver manual and

the logos on the front of the receiver

.

Notes

If the audio format of the digital output does not match

the capabilities of your receiver

, the receiver will 

produce a strong, distorted sound or no sound at all. 

Six Channel Digital Surround Sound via digital con-

nection can only be obtained if your receiver is

equipped with a Digital Multi-channel decoder

T

o

 confirm the audio format of the current DVD 

selection display

, press 

AUDIO.

Repeated pressing of the 

AUDIO button may allow

you to select between various audio formats available

on the disc.

Note

This player does not perform internal (2 channel)

decoding of a DTS sound track. 

T

o

 enjoy DTS 

multi channel surround, you must connect this player to

a DTS compatible receiver via one of this player

’s 

digital audio outputs.

Amplifier (Receiver)

Rear of DVD player

A

X

O

L

R

AUDIO INPUT

DIGITAL INPUT

OPTICAL

COAXIAL

DIGITAL INPUT

Connections

T

ips

Depending on your 

TV and other equipment you wish

to connect, there are various ways you could connect

the player

. Use only one of the connections

described below

.

Please refer to the manuals of your 

TV

, VCR, Stereo

System or other devices as necessary to make the

best connections.

For better sound reproduction, connect the player

’s

AUDIO OUT

jacks to the audio in jacks of your 

amplifier

, receiver

, stereo or audio/video equipment.

See 

“Connecting to optional equipment

” on page 1

1

.

Caution

Make sure the DVD Player is connected directly to

the 

TV

T

une the 

TV to the corresponding video input.

Do not connect the DVD Player

’s 

AUDIO OUT

jack to

the phono in jack (record deck) of your audio system.

Do not connect your DVD Player via your VCR. 

The

DVD image could be distorted by the copy protection

system. 

Connecting to a TV

Make one of the following connections, depending on

the capabilities of your existing equipment.

When using the COMPONENT

VIDEO OUT

jacks,

set the VIDEO OUTPUT

switch to COMPONENT

.

When using the S-VIDEO OUT

jack, set the VIDEO

OUTPUT

switch to S-VIDEO.

V

ideo connection 

1

Connect the VIDEO OUT

jack on the DVD Player to

the video in jack on the 

TV using the video cable

supplied 

(V)

.

2

Connect the Left and Right 

AUDIO OUT

jacks of

the DVD Player to the audio left/right in jacks on the

TV 

(A)

using the supplied audio cables.

S-V

ideo connection 

1

Connect the S-VIDEO OUT

jack on the DVD Player

to the S-V

ideo in jack on the 

TV using the optional

S-V

ideo cable 

(S)

.

2

Connect the Left and Right 

AUDIO OUT

jacks of

the DVD Player to the audio left/right in jacks on the

TV 

(A)

using the supplied audio cables.

Component V

ideo (Color Stream

®

) connection

1

Connect the COMPONENT

VIDEO OUT

jacks on

the DVD Player to the corresponding in jacks on

the 

TV using an optional 

Y

P

B

P

R

cable 

(C)

.

2

Connect the Left and Right 

AUDIO OUT

jacks of

the DVD Player to the audio left/right in jacks on the

TV 

(A)

using the supplied audio cables.

P

R

P

B

Y

COMPONENT VIDEO INPUT

L

R

AUDIO INPUT

VIDEO 

INPUT

S-VIDEO 

INPUT

Rear of TV

Rear of DVD player

S

A

V

C

MODEL:SD-K615

Summary of Contents for SD-3805




















































































Reviews: