Toshiba SD-3805, Service Manual

Page: 10 / 83

1-9
PREPARA TION
Before Operation (Cont
’d)
Parental Control
Rating
Movies on DVDs may contain scenes not suitable for children.
Therefore, discs may contain Parental Control
information that applies to the complete disc or to certain scenes on the disc.
These scenes are rated
from 1 to 8, and alternatively
, more suitable scenes are
available for selection on some discs. Ratings are country-dependent.
The Parental Control feature allows
you to prevent discs from being played by your children or to have certain discs played with alternative scenes.
1
Select
“
Rating
”
on the Setup menu using the
3333
and
4444
buttons.
2
While
“
Rating
”
is selected, press
2222
.
3
When you have not entered a password yet; Enter a 4-digit password using the numbered but- tons to create a personal 4-digit security password, then press ENTER.
And enter the 4-digit
password
again and press ENTER to verify
.
When you have already entered a password; Enter a 4-digit password using the numbered but- tons to confirm the personal 4-digit security pass- word, then press ENTER.
If you make a mistake before pressing ENTER, press CLEAR and enter 4-digit security password again.
4
Select a rating from 1 to 8 using the
3333
/
4444
but-
tons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Unlock:
If
you
select
Unlock,
Parental
Control
is
not
active.
The
disc
will
play
in
full.
Ratings
1
to
8:
Some
discs
contain
scenes
not
suitable
for
children.
If
you
set
a
rating
for
the
play-
er
,
all
disc
scenes
with
the
same
rating
or
lower
will
be
played.
Higher
rated
scenes
will
not
be
played
unless
an
alternative
scene
is
available
on
the
disc.
The
alternative
must
have
the
same
rating
or
a
lower
one.
If
no
suitable
alternative
is
found,
play-
back
will
stop.
Y
ou
must
enter
the
4-digit
password
or
change
the
rating
level
in
order
to
play
the
disc.
5
Press ENTER to confirm your rating selection, then press SETUP
to exit the menu.
Area Code
Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See
“Area Code List
”, page 25.).
1
Select
Area Code using the
3333
/
4444
buttons on the
setup menu.
2
While
Area Code is selected, press
2
.
3
Follow step 3 of
“
Rating
”
on left.
4
Select the first character using the
3333
/
4444
buttons.
5
Shift the cursor using
1111
/
2
buttons and select
the second character using
3333
/
4444
buttons.
6
Press ENTER to confirm your area code selec- tion, then press SETUP
to exit the menu.
Note
Confirmation of the 4-digit password is necessary when the code is changed (see
“Changing the 4-digit code
”
below ).
Changing the 4-digit code
1
Follow Steps 1-2 as shown above to the left (Rating).
2
Enter the old code, then press ENTER.
3
Select Change using the
3333
/
4444
buttons then press
ENTER.
4
Enter the new 4-digit code, then press ENTER.
5
Enter exactly the same code a second time and veri- fy by pressing ENTER.
6
Press SETUP
to exit the menu.
If you forget your 4-digit code
If you forget your password, to clear the current pass- word, follow the procedure below
.
1
Press SETUP
to display the setup menu.
2
Use the Number buttons to enter the 6-digit number “210499.
”
The 4-digit password is cleared.
“P
CLr
” appears on the dis-
play
.
The message will appear if the disc tray is closed. It
will be on the display until you try another feature.
3
Enter a new code as shown above to the left (
R
a
ti
n
g
).
DVD
DVD
Disc Subtitle Disc Menu Rating Area Code TV Aspect Menu Language Progressive Scan Digital Audio
Output
5.1 Speaker Setup Others Disc Audio
Code Set
U S
Disc Subtitle Disc Menu Rating Area Code TV Aspect Menu Language Progressive Scan Digital Audio
Output
5.1 Speaker Setup Others Disc Audio
8 7 6 5 4 3 2 1 Unlock Change
Before Operation (Cont
’d)
Sound
Digital Audio
Output
Each DVD disc has a variety of audio output options. Set the player
’s Digital
Audio Output according to the
type of audio system you use. DOLBY
DIGIT
AL/PCM:
Select
“DOLBY
DIGIT
AL/PCM
”
if you connected the DVD Player
’s DIGIT
AL
OUT
jack to
a Dolby Digital decoder (or an amplifier or other equip- ment with a Dolby Digital decoder). Stream/PCM:
Select
“Stream/PCM
” if you connected
the DVD Player
’s DIGIT
AL
OUT
jack to an amplifier or
other equipment with a DTS decoder
, Dolby Digital
decoder or MPEG decoder
.
PCM:
Select when connected to a 2 channel digital
stereo amplifier
.
The DVD player outputs sounds in the
PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1 or MPEG2 recording system.
Sample Frequency
T
o
change the Sample Frequency setting, first select
the desired Digital
Audio Output as indicated as above.
If your receiver or amplifier is NOT
capable of handling
96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass all signals through without processing.
Others
The DRC, V
ocal, PBC, B.L.E., Pluge and DNR settings
can be changed. •
Press
3333
/
4444
to select the desired item and press
ENTER.
The setting of the selected item alternates
between On and Of
f.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program
’s sound-
track in the most accurate and realistic presentation possible, thanks to digital audio technology
. However
,
you may wish to compress the dynamic range of the audio output (the dif
ference between the loudest sounds
and the quietest ones).
Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set DRC to On for this ef
fect.
V
ocal
Set V
ocal to On only when a multi-channel karaoke
DVD is playing.
The karaoke channels on the disc will
mix into normal stereo sound.
PBC
Set Playback Control (PBC) to On or Of
f.
On:
V
ideo CDs with PBC are played according to the PBC.
Off:
V
ideo CDs with PBC are played the same way as
Audio
CDs.
B.L.E. (Black Level Expansion)
T
o
select the black level of playback pictures. Set your
preference and monitor
’s ability
.
On:
Expanded grey scale. (0 IRE cut of
f)
Off:
Standard grey scale. (7.5 IRE cut of
f)
Pluge (Blacker than Black)
For proper adjustment of your television brightness settings utilizing a commercially available test disc.
On:
Select when you adjust the level of your
TV using a
commercially available test disc that contains pluge signals.
Off:
For normal use.
DNR (Digital Noise Reduction)
Y
ou can view a picture with less video noise.
DNR1:
Normal level
DNR2:
Expanded level.
Off:
Of
f
.
Notes
–
Actual picture enhancement may vary depending on the quality of the disc.
–
While the DNR2 (expanded level) can provide additional improvement in the reduction of noise in the video signal, it may produce undesirable picture artifacts on some discs. Should this occur
, select a more appropriate DNR level (nor-
mal or of
f).
–
Depending on the disc, some picture detail may be lost by the picture enhancement.
–
A
DVD audio disc with Dolby Digital or DTS soundtrack may
be played, some DVD audio discs include moving pictures which may be modified by the above processes.
Disc Subtitle Disc Menu Rating Area Code TV Aspect Menu Language Progressive Scan Digital Audio
Output
5.1 Speaker Setup Others Disc Audio
DRC On V
ocal On
PBC On B.L.E. Off Pluge Off DNR Off
Disc Subtitle Disc Menu Rating Area Code TV Aspect Menu Language Progressive Scan Digital Audio
Output
5.1 Speaker Setup Others Disc Audio
DOLBY DIGIT
AL
/PCM
Stream/PCM PCM Sample Freq.
48 KHz 96KHz
MODEL:SD-K615