Toshiba SD-3805, Service Manual

Page: 6 / 83

1-5
INTRODUCTION
Front Panel and Display W
indow
TITLE
PROG.
RANDOM
ALL
AB
CHP/TRK
DVD
VCD
MP3 CD
1
2
3
4
5
Forward Skip (
TTTT
)
Advances to NEXT
chapter/track.
Press and hold for two seconds for a fast forward search.
EX-CHANGE
Changes a disc (other than the one playing) during playback
E.A.M.
Select sound mode during disc playback.
Reverse Skip (
SSSS
)
Returns to beginning of current chapter/track or to
PREVIOUS chapter/track.
Press and hold for two seconds for a fast reverse
search.
ST
OP
(
9999
)
Stops playback.
P
AUSE (
;;;;
)
Pause playback temporarily /
press repeatedly for frame-by-frame playback.
PLA
Y
(
2222
)
Starts playback.
OPEN/CLOSE (
////
)
Opens or closes the disc tray
.
ON/ST
ANDBY
indicator
Lights red when the player is in Standby mode (of
f).
RANDOM
Plays tracks
in random
order
.
REPEA
T
Repeat chapter
,
track, title, Disc,
all.
CLEAR Removes a track number on the program menu or a mark on the MARKER SEARCH menu.
Remote Sensor Point the DVD Player remote control here.
Display window
Shows the current status of the player
.
Indicates current player function: Playback, Pause, etc.
A
light will appear if a disc is in the disc
tray
.
The current disc tray flashes.
ANGLE active
DVD inserted
CD
Audio CD inserted
VCD
V
ideo CD inserted
MP3
MP3 disc inserted
DVD
TITLE
Indicates current title number
CHP/TRK
Indicates current chapter or track number
Indicates total playing time/elapsed time
PROG.
Programmed playback active
RANDOM
RANDOM play-
back active
Indicates repeat mode
Disc T
ray
Insert a disc here.
ON/ST
ANDBY
Switches the player ON and OFF
.
Disc number (1 - 5) Selects a disc tray for playback.
ZOOM
Enlarges video image.
DISC SKIP
Moves to the next available disc tray
.
Before Use (Cont
’d)
Precautions
Handling the unit
When shipping the unit The original shipping carton and packing materials come in handy
. For maximum protection, re-pack the
unit as it was originally packed at the factory
.
When setting up the unit The picture and sound of a nearby
TV
, VCR, or radio
may be distorted during playback. In this case, position the unit away from the
TV
, VCR, or radio, and turn of
f
the unit after removing the disc. T
o
keep the exterior surfaces clean
Do not use volatile liquids, such as insecticide spray
,
near the unit. Do not allow rubber or plastic products to contact the unit for a long period of time.
They will leave
marks on the surface. T
o
move the unit
When you move the player
, take out any discs. If you
don
’t, the discs may be damaged or be dropped to the
internal of the DVD player
.
Cleaning the unit
T
o
clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty
,
use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents, such as alcohol, benzine, or thinner
, as these might damage the surface
of the unit. T
o
obtain a clear picture
The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality will be poor
.
Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer
.
Notes on Discs
Handling discs
Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- light, as there may be a considerable temperature increase inside the car
.
Cleaning discs
Fingerprints and dust on the disc can cause poor pic- ture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the cen- ter out. Do not use strong solvents such as alcohol, benzine, thinner
, commercially available cleaners, or anti-static
spray intended for older vinyl records.
About Symbols
About the
symbol display
“
” may appear on the
TV screen during operation.
This icon means the function explained in this owner
’s
manual is not available on that specific DVD video disc.
About the disc symbols for instructions
A
section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
DVD V
ideo CDs with the PBC (playback control)
function. V
ideo CDs without the PBC (playback control)
function. Audio CDs. MP3 disc.
MP3
CD
VCD1.1 VCD2.0
DVD
MODEL:SD-K615