Toshiba SD-22VB, Service Manual

Page: 18 / 111

1.
2. Remove the Top Cabinet and Front Cabinet. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.)
Rotate the gear of Deck CD section in the direction of the arrow by hand, remove the disc from Deck
CD. (Refer to Fig. 3)
DISC REMOVAL METHOD AT NO POWER SUPPLY
Fig. 3
Deck CD
Gear
Insert hole for screw driver
1.
2.
3.
4.
5.
Remove the Top Cabinet, Front Cabinet and DVD Block and the Fig. 1 below can be seen.
(Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.)
Remove one screw of the Loading Motor from the insert hole for screw driver and remove the Loading
Motor.
Rotate the Pinch Roller Cam in the direction of the arrow by hand to slacken the Video Tape.
(Refer to Fig. 2)
Rotate the Clutch Ass'y either of the directions to wind the Video Tape in the Cassette Case.
Repeat the above step 3~4. Then take out the Video Cassette from the Deck Chassis. Be careful not to
scratch on the tape.
TAPE REMOVAL METHOD AT NO POWER SUPPLY
Fig. 1
Pinch Roller Cam
Main Cam
Clutch Ass'y
Main Chassis (Front Side)
Loading Motor
Screw
Capstan DD Unit
Fig. 2
A1-2
PARENTAL CONTROL - RATING LEVEL
4-DIGIT SECURITY CODE CANCELLATION
If the stored 4-digit security code in the Rating Level menu needs to be cancelled, please follow the steps below.
Connect the set to TV Monitor.
Turn on the power, and set to the DVD stop mode.
Press the SET UP button to display the DVD menu.
Press the SET +/- button to select the "Operation" menu.
Press the CH UP/DOWN button to select the Parental Lock, then press the ENTER button.
Press the CH UP/DOWN button to select the ON or OFF, then press the ENTER button.
Press the STOP button four times on the remote control, then press the ENTER button.
The 4-digit security code is cleared.
Press the SET UP button to disappear the DVD menu. 1.
2.
3.
4.
5.
6.
7.
8.