manualshive.com logo in svg

Toshiba Satellite R10, Maintenance Manual

Share
Download
Toshiba Satellite R10 Maintenance Manual Download Page 220

3 Tests and Diagnostics 

3.32  SETUP

 

Satellite R10 Maintenance Manual (960-509) 

 

3-101 

System Auto Off 

Use this option to set the duration of the HDD automatic power off function. 

It can be set only when the “Resume” id selected in [Power-up mode]. 

Disabled

   

 

Disables system automatic off function.

 

xx Min.

 

 

 

Automatically turns off the system if it is not used for the 
duration set. The duration 

xx 

can be set from 

10

 to 

60

 minutes. 

LCD Brightness 

Use this option to set the level of LCD brightness. 

Super-Bright

   

Full brightness for maximum visibility. 

Bright

   

 

 

Full brightness for high visibility. 

Semi-Bright

   

Less than full brightness for saving power. 

Cooling Method 

Maximum Performance   

If the CPU becomes too hot, the fan turns on 
automatically in a high speed to cool down the 
CPU. 

Performance   

 

 

 

If the CPU becomes too hot, the fan turns on 
automatically.  When the CPU temperature falls to 
a normal range, the fan turns off. 

Battery optimized  

 

If the CPU becomes too hot, the processing speed is 

lowered. If the temperature is still too high, the fan 
turns on. When the CPU temperature falls to a 
normal range, the fan is turned off and the 
processing speed is increased. 

NOTE:

 Too hot condition may cause defect on the CPU. When the hot condition 

continues, the power is automatically turned off in resume mode. 

4.

 

Password 

This option sets or resets the user password for power on and instant security (

Fn+F1

). 

Registered

 

 

 

The user password has been registered. 

Not registered

 

 

The user password has not been registered. 

For details on setting the user password, refer to the User’s Manual. 

Summary of Contents for Satellite R10

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands