manualshive.com logo in svg

Toshiba Satellite R10, Maintenance Manual

Share
Download
Toshiba Satellite R10 Maintenance Manual Download Page 148

3  Tests and Diagnostics  

3.14  Real Timer Test 

Satellite R10 Maintenance Manual (960-509) 

 

3-31 

Subtest 03 

Real time carry 

CAUTION

:  When this subtest is executed, the current date and time are erased. 

This subtest checks the real time clock increments. Make sure the date and time are 
displayed in the following format: 

Current date  :  12-31-1999 
Current time  :  23:59:58 

The real time increments are automatically executed and the following is displayed: 

Current date :  01-01-2000 
Current time :  00:00:00 

PRESS [Enter] KEY TO EXIT TEST  

To exit the test, press 

Enter

. 

  

Summary of Contents for Satellite R10

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands