manualshive.com logo in svg

Toshiba Satellite R10, Maintenance Manual

Share
Download
Toshiba Satellite R10 Maintenance Manual Download Page 166

3  Tests and Diagnostics  

3.21  Head Cleaning 

 

Satellite R10 Maintenance Manual (960-509) 

 

3-49 

3.21  Head Cleaning 

3.21.1  Function Description 

This function cleans the heads in the FDD by executing a series of head load/seek and read 
operations. A cleaning kit is necessary to perform this program. 

3.21.2  Operations 

1.

 

Selecting test 

4

 from the DIAGNOSTIC MENU and pressing 

Enter

 

displays the following 

messages: 

DIAGNOSTICS - FLOPPY DISK HEAD CLEANING : VX.XX 

Mount cleaning disk(s) on drive(s). 

Press any key when ready.

 

2.

 

Remove the Diagnostics Disk from the FDD, then insert the cleaning disk and press 

Enter

. 

3.

 

When the 

“

cleaning start”

 

message appears, the FDD head cleaning has begun. 

4.

 

The display automatically returns to the DIAGNOSTIC MENU when the program is 
completed. 

Summary of Contents for Satellite R10

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands