manualshive.com logo in svg

Toshiba Satellite R10, Maintenance Manual

Share
Download
Toshiba Satellite R10 Maintenance Manual Download Page 126

3  Tests and Diagnostics

  

3.3  Setting of the hardware configuration

 

Satellite R10 Maintenance Manual (960-509) 

 

3-11 

Setting of the HWSC 
Setting of the UUID 
Display of the DMI information (including UUID) 
Setting of DVD region code (Yes/No) 

 

 

After completion of the above settings, H/W configuration & DMI information are 
appeared in order. Check the contents and press 

Enter

. 

Following message appears in the display. Press any key, then return to the H/W 
initial information setting tool menu. 

 

 

 

 

 

+------------------------------------------------+ 

 

 

 

 

 

+  It switches off the power on automatically.   + 

 

 

 

 

 

+------------------------------------------------+ 

 

 

 

 

 

Press any key to continue... 

 

Subtest 02   

Region write 

 

 

 

 

This subtest executes the setting of the region code for DVD drive based on the 
destination of the machine.  

 

 

 

 

When the region code is already written, test ends without setting.  

 

 

 

 

The following message appears in the display after setting the region code. Press 
any key to return to the H/W initial information setting tool menu. 

 

 

 

 

 

*********************************** 

 

 

 

 

 

*******     It completed    ******* 

 

 

 

 

 

*********************************** 

 

 

 

 

 

*   

 

    

 

 

              

 * 

 

 

 

 

 

Press any key to continue... 

Subtest 03 

DMI information save 

NOTE: 

Before replacing the system board, be sure to execute this subtest and save the 

DMI information to the floppy disk. 

This is one of tools to copy the DMI information to a new PCB after replacing.  

This subtest saves all the DMI data in a floppy disk.  

Summary of Contents for Satellite R10

































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands