Toshiba Satellite Pro U500 User Manual Download Page 37

Page: 37 / 220

User ’s Manual

1-7

Introduction

Slots

ExpressCard Slot

The ExpressCard slot that can accommodate two

standard module formats; an ExpressCard/34

module and an ExpressCard/54 module. An

ExpressCard module is a small add-in card

technology based on the PCI Express and

Universal Serial Bus (USB) interfaces.

Bridge Media Card

Slot

Supports SD/miniSD/microSD/SDHC memory

card, MMC, MEMORY STICK, MEMORY STICK

PRO, MEMORY STICK PRO DUO and xD Picture

card.

Multimedia

Web Camera

Record/Send still or video images with this

integrated webcam. (provided with some models)

Sound System

A Windows

Sound System that provides

speakers as well as jacks for an external

microphone and headphones.
Special harman/kardon sound system (depending

on the model you purchased).

Headphone (S/P

DIF) jack

This jack outputs analog audio signals. This jack

can be used also as S/P DIF jack and enables

connection of optical digital correspondence

apparatus.

Microphone Jack

A 3.5 mm mini microphone jack enables

connection of a three-conductor mini jack for

monaural microphone input.

SIM Card Slot

This slot (located underneath the battery pack)

allows you to transfer information from a standard

25mm Subscriber identity Module (SIM) card to

your computer. The SIM card slot is only featured

on some models.

Summary of Contents for Satellite Pro U500





























































































































































































































Search results

Summary of Contents for Satellite Pro U500

Reviews:

Related manuals for Satellite Pro U500

Brands by name

Popular brands

Toshiba Satellite Pro U500, User Manual

Search results

Summary of Contents for Satellite Pro U500

Reviews:

Related manuals for Satellite Pro U500

Brands by name

Popular brands