manualshive.com logo in svg

Toshiba Satellite Pro U400 Series, Maintenance Manual

The Toshiba Satellite Pro U400 Series offers exceptional performance and reliability. Enhance your user experience with our comprehensive Resource Manual, available for download absolutely free. Unlock the full potential of your laptop and familiarize yourself with its features and functionalities by downloading the manual from manualshive.com.

Share
Download
background image

Test Program for Field. 

Satellite U400 and Satellite Pro U400 Tests and Diagnostics Manual 

39

 

Subtest 12 

Color Tiling 

This subtest displays black, gray, white, and 3 gradations of red, green, and 
blue as shown in the following display. 

 

 

 

 

 

 

 

Black Red  Green  Blue 

 

 

Gray Red 

Gradation 

Green 

Gradation 

Blue 

Gradation 

 

 

White Red 

Gradation 

Green 

Gradation 

Blue 

Gradation 

 

 

 

 

 

 

 

 
 

To exit this subtest and return to the Display Test menu: 

 
 Press 

Enter

 if 

NO

 was selected for 

Test Loop

 on the Test Parameter Menu. 

 Press 

Ctrl 

+ 

break

 if 

YES

 was selected for 

Test Loop

 on the Test Parameter 

Menu.

 

Summary of Contents for Satellite Pro U400 Series


















































































































































































































































































































Reviews:

No comments

Related manuals for Satellite Pro U400 Series

IBM ThinkPad R40e Servisna Navodila In Navodila Za Odpravljanje Težav preview
ThinkPad R40e
Brand: IBM Pages: 94
IBM ThinkPad R40e Příručka Pro Základní Servis A Odstraňování Problém preview
ThinkPad R40e
Brand: IBM Pages: 102
IBM ThinkPad R40e Manual Til Service Og Fejlfinding preview
ThinkPad R40e
Brand: IBM Pages: 96
IBM ThinkPad R40e Guida All’Assistenza E Alla Risoluzione Dei Problemi preview
ThinkPad R40e
Brand: IBM Pages: 96
IBM ThinkPad R40e Manual De Assistência E Resolução De Problemas preview
ThinkPad R40e
Brand: IBM Pages: 98
IBM ThinkPad R40 Hardware Maintenance Manual preview
ThinkPad R40
Brand: IBM Pages: 178
IBM ThinkPad i Series Manual preview
ThinkPad i Series
Brand: IBM Pages: 162
IBM ThinkPad X30, ThinkPad X31 (MT 2672 Hardware Maintenance Manual preview
ThinkPad X30, ThinkPad X31 (MT 2672
Brand: IBM Pages: 138
IBM THINKPAD A30 Guía De Servicio Y De Resolución De Problemas preview
THINKPAD A30
Brand: IBM Pages: 94
IBM THINKPAD I 1200 - User Manual preview
THINKPAD I 1200 -
Brand: IBM Pages: 162
Acer TravelMate 8210 Service Manual preview
TravelMate 8210
Brand: Acer Pages: 108
Medion AKOYA E6221 User Manual preview
AKOYA E6221
Brand: Medion Pages: 100
Medion Akoya P7815 Instruction Manual preview
Akoya P7815
Brand: Medion Pages: 90
Acer Aspire 7735ZG Series Quick Manual preview
Aspire 7735ZG Series
Brand: Acer Pages: 13
Acer Aspire 7535 Series Service Manual preview
Aspire 7535 Series
Brand: Acer Pages: 220
Acer Aspire 7551G Quick Manual preview
Aspire 7551G
Brand: Acer Pages: 9
Dell Latitude 2120 Technical Specifications preview
Latitude 2120
Brand: Dell Pages: 2
Dell Latitude 9410 Quick Start Manual preview
Latitude 9410
Brand: Dell Pages: 20

Brands by name

Popular brands

Load more brands