manualshive.com logo in svg

Toshiba Satellite PRO T230, Maintenance Manual, Page: 207 / 260

Share
Download
Toshiba Satellite PRO T230 Maintenance Manual Download Page 207

Fehler! Verwenden Sie die Registerkarte 'Start', um 

標題

 2 dem Text zuzuweisen, der hier angezeigt werden 

soll. Fehler! Verwenden Sie die Registerkarte 'Start', um 

標題

 2 dem Text zuzuweisen, der hier angezeigt 

werden soll.

 

4 Replacement Procedures 

Satellite/Satellite PRO T230  Maintenance Manual 

4-69 

Installing the Antennas for WLAN 

Install the Antennas for WLAN according to the following procedures. 

1.

 

Stick the antennas in the correct position on the LCD cover assembly. Notice that white 
antenna is on the left and black antenna is on the right side of the LCD cover assembly. 

2.

 

Route the antennas in the routing channel on the LCD cover assembly. 

3.

 

Adhere the foil on the LCD cover assembly to antennas. 

 

Summary of Contents for Satellite PRO T230





































































































































































































































































Reviews:

No comments