manualshive.com logo in svg

Toshiba Satellite PRO T230, Maintenance Manual

The Toshiba Satellite PRO T230 Maintenance Manual is available for free download on our website. This comprehensive manual provides detailed instructions and guidelines to help users efficiently maintain and troubleshoot their T230 devices. Visit manualshive.com now to access the manual and optimize the performance of your Toshiba Satellite PRO T230.

Share
Download
background image

3.  Tests and Diagnostics 

3.11 LCD Pixels Mode Test 

This LCD pixels mode test checks whether video display is fine. 

This test includes two modes of the test: 

1.

 

Text Mode 

- including 40*25 (16 colors) and 80*25 (2/16colors). 

2.

 

VGA Mode 

- including 320*200 (2/4/16 colors), 640*200 (2/16 colors), 640*350 (2/16 colors), 
640*480 (2/16/256 colors). 

The screen should display as below, indicating whether the test is passed or failed after the 
question. 

 

 

 

 

 

 

Satellite/Satellite PRO T230 

 Series Maintenance Manual 

21

Summary of Contents for Satellite PRO T230





































































































































































































































































Reviews:

No comments

Related manuals for Satellite PRO T230

UMAX Technologies visionbook 12WRx User Manual preview
visionbook 12WRx
Brand: UMAX Technologies Pages: 72
Oregon Scientific HOT WHEELS ACCELERATOR Instruction preview
HOT WHEELS ACCELERATOR
Brand: Oregon Scientific Pages: 28
Fujitsu Siemens Computers AMILO Xa 2528-12P Datasheet preview
AMILO Xa 2528-12P
Brand: Fujitsu Siemens Computers Pages: 2
bto X-Book 15CL879 Manual preview
X-Book 15CL879
Brand: bto Pages: 216
Dell Alienware m15 R4 Setup And Specifications preview
Alienware m15 R4
Brand: Dell Pages: 21
Dell Alienware m15 R7 Setup And Specifications preview
Alienware m15 R7
Brand: Dell Pages: 24
Dell Alienware m15 R6 Setup And Specifications preview
Alienware m15 R6
Brand: Dell Pages: 24
Dell C600 - Latitude Intel P-4 1.4GHz Service Manual preview
C600 - Latitude Intel P-4 1.4GHz
Brand: Dell Pages: 62
Dell Alienware m15 R3 Setup And Specifications preview
Alienware m15 R3
Brand: Dell Pages: 20
Dell Alienware M15x Specifications preview
Alienware M15x
Brand: Dell Pages: 9
Dell Chromebook 3400 Service Manual preview
Chromebook 3400
Brand: Dell Pages: 108
Dell Alienware M15x Service Manual preview
Alienware M15x
Brand: Dell Pages: 118
Dell d400 - Latitude - Pentium M 1.3 GHz Service Manual preview
d400 - Latitude - Pentium M 1.3 GHz
Brand: Dell Pages: 78
Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz User Manual preview
blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz
Brand: Dell Pages: 248
Dell Chromebook 5190 Owner'S Manual preview
Chromebook 5190
Brand: Dell Pages: 85
Dell Alienware m17 Service Manual preview
Alienware m17
Brand: Dell Pages: 119
Dell Alienware M14x MOBILE Manual preview
Alienware M14x MOBILE
Brand: Dell Pages: 122
Dell Alienware m15 R3 Service Manual preview
Alienware m15 R3
Brand: Dell Pages: 81

Brands by name

Popular brands

Load more brands