Toshiba Satellite PRO T230 Page 128 Maintenance Manual Download

Page: 128 / 260

3. Tests and Diagnostics

3.22 EE-PROM SETTING

This EE-PROM SETTING will set the computer’s function status into EEPROM, included
supported function and no support function.

NOTE: Should perform EE-PROM SETTING once change M/B. It defined as normal rule.

The screen should display as below:

If press “1” to set MIC function status in EE-PROM, the screen should display as below:

Please check related information to judge this unit whether has MIC function.

Satellite/Satellite PRO T230

Series Maintenance Manual

Summary of Contents for Satellite PRO T230





































































































































































































































































Search results

Summary of Contents for Satellite PRO T230

Reviews:

Related manuals for Satellite PRO T230

Brands by name

Popular brands

Toshiba Satellite PRO T230, Maintenance Manual

Search results

Summary of Contents for Satellite PRO T230

Reviews:

Related manuals for Satellite PRO T230

Brands by name

Popular brands