Toshiba Satellite Pro A500D series Maintenance Manual Download

Page: 195 / 279

Error! Style not defined. Error! Style not defined.

4 Replacement Procedures

4.20

Display Assembly

Removing the Display Assembly

CAUTION:

Use care to avoid the antenna cable being caught between the display assembly and the
laptop.

Remove the display assembly according to the following procedures and Figure 4.37.

Remove six M2.5x6 screws securing the display assembly to the laptop.

M2.5x6*6

Figure 4.37 Removing the display assembly

Remove the display assembly.

Installing the Display Assembly

Install the display assembly according to the following procedures.

Place the display assembly in the correct position.

Secure the display assembly with six M2.5x6 screws.

Satellite A500D Maintenance Manual

4-45

Summary of Contents for Satellite Pro A500D series
























































































































































































































































































Search results

Summary of Contents for Satellite Pro A500D series

Reviews:

Related manuals for Satellite Pro A500D series

Brands by name

Popular brands

Toshiba Satellite Pro A500D series, Maintenance Manual

Search results

Summary of Contents for Satellite Pro A500D series

Reviews:

Related manuals for Satellite Pro A500D series

Brands by name

Popular brands