Toshiba Satellite Pro A500D series Maintenance Manual Download

Page: 47 / 279

2 Troubleshooting Procedures

Satellite A500D/Satellite A505D/Satellite A507D/Satellite Pro Series

Maintenance Manual

Table 2-2 DC-IN LED

AC-IN LED

Power supply status

Solid on

AC power exists (LED is solid White).

Off

No AC power exists.

To check the power supply status, install a battery pack and connect an AC adaptor to the
DC-IN port on the computer and to a power supply.

If the DC-IN LED or Battery LED is not lit, go to Procedure 2.

Procedure 2

Adaptor / battery replacement

A faulty adaptor may not supply power or may not charge the battery. Perform Check 1.

Check 1

Connect a new AC adaptor. If the problem is not resolved, go to Check 2.

Check 2

Insert a new battery. If the problem is still not resolved, go to Procedure 3.

Summary of Contents for Satellite Pro A500D series
























































































































































































































































































Search results

Summary of Contents for Satellite Pro A500D series

Reviews:

Related manuals for Satellite Pro A500D series

Brands by name

Popular brands

Toshiba Satellite Pro A500D series, Maintenance Manual

Search results

Summary of Contents for Satellite Pro A500D series

Reviews:

Related manuals for Satellite Pro A500D series

Brands by name

Popular brands