Toshiba Satellite Pro A500D series Maintenance Manual Download

Page: 165 / 279

Error! Style not defined. Error! Style not defined.

4 Replacement Procedures

4.5

UWB Module

Removing the UWB Module

Remove the UWB module according to the following procedures and Figure 4.7.

Detach the antenna on the UWB card.

Disconnect two antenna cables and remove two M2x4 screws that secure the UWB card.

Pull the UWB module out at an angle.

M2x4*2

Figure 4.7 Removing the UWB module

Installing the UWB Module

Install the UWB module according to the following procedures.

Insert the UWB card into the connector.

Press the card down and secure it with two M2x4 screws.

Attach the antenna to the UWB module.

Satellite A500D Maintenance Manual

4-15

Summary of Contents for Satellite Pro A500D series
























































































































































































































































































Search results

Summary of Contents for Satellite Pro A500D series

Reviews:

Related manuals for Satellite Pro A500D series

Brands by name

Popular brands

Toshiba Satellite Pro A500D series, Maintenance Manual

Search results

Summary of Contents for Satellite Pro A500D series

Reviews:

Related manuals for Satellite Pro A500D series

Brands by name

Popular brands