manualshive.com logo in svg

Toshiba Satellite Pro A500D series, Maintenance Manual

The Toshiba Satellite Pro A500D series Maintenance Manual is a comprehensive guide that provides essential information for users to properly maintain and troubleshoot their device. This invaluable manual is available for free download at manualshive.com, ensuring users can access it easily and conveniently.

Share
Download
background image

 

3.  Tests and Diagnostics 

Satellite A500D / Satellite A505D / Satellite A507D / Satellite Pro Series T&D                                             

3.13 LAN Test 

The LAN test checks the LAN full-duplex environment. 

NOTE:  LAN loopback needs to plug in before test begins. 

 

And LAN information will show on the test screen: 

 

IO Base – Port: A000H 

 

IRQ – BH, it’s “IRQ  B”. 

 

Node – it is “MAC Address”. 

 

Line Speed – 1000Mbps or 100Mbps or 10 Mbps. 

 

Bus ID – it’s “14”. 

The LAN test includes three subtests of the: 

1.

 

Speed1000 

2.

 

Speed100 

3.

 

Speed10 

The subtests run automatically. 

Summary of Contents for Satellite Pro A500D series
























































































































































































































































































Reviews:

No comments

Related manuals for Satellite Pro A500D series

Forensic Air Lite M-12 User Manual preview
Air Lite M-12
Brand: Forensic Pages: 10
Acer Extensa 14 User Manual preview
Extensa 14
Brand: Acer Pages: 75
Acer Extensa 5220 Service Manual preview
Extensa 5220
Brand: Acer Pages: 182
Acer Extensa 5210 Service Manual preview
Extensa 5210
Brand: Acer Pages: 182
Acer Extensa 4630G Service Manual preview
Extensa 4630G
Brand: Acer Pages: 194
Acer Extensa 390 Features Manual preview
Extensa 390
Brand: Acer Pages: 30
Fujitsu ESPRIMO Mobile U9210 Datasheet preview
ESPRIMO Mobile U9210
Brand: Fujitsu Pages: 6
Fujitsu ESPRIMO Mobile V5505 Easy Manual preview
ESPRIMO Mobile V5505
Brand: Fujitsu Pages: 27
Fujitsu CELSIUS H730 Operating Manual preview
CELSIUS H730
Brand: Fujitsu Pages: 92
Fujitsu E5511 Quick Start Manual preview
E5511
Brand: Fujitsu Pages: 2
Fujitsu ESPRIMO Mobile V6555 Easy Manual preview
ESPRIMO Mobile V6555
Brand: Fujitsu Pages: 34
Fujitsu ESPRIMO Mobile V6535 Datasheet preview
ESPRIMO Mobile V6535
Brand: Fujitsu Pages: 5
Fujitsu E8110 - LifeBook - Core 2 Duo 1.66 GHz User Manual preview
E8110 - LifeBook - Core 2 Duo 1.66 GHz
Brand: Fujitsu Pages: 128
Fujitsu CELSIUS H7510 Manual preview
CELSIUS H7510
Brand: Fujitsu Pages: 52
Fujitsu FI-6750S Operator'S Manual preview
FI-6750S
Brand: Fujitsu Pages: 212
Fujitsu FPCM21503 Brochure & Specs preview
FPCM21503
Brand: Fujitsu Pages: 2
HP Compaq Mini Series Getting Started Manual preview
Compaq Mini Series
Brand: HP Pages: 52
HP Compaq CQ45 Product End-Of-Life Disassembly Instructions preview
Compaq CQ45
Brand: HP Pages: 3

Brands by name

Popular brands

Load more brands