Replacement Procedures
Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
4-23
4.7 Keyboard
Remove the keyboard
The following describes the procedure of removing the keyboard (See Figure 4-9 to 4-11).
CAUTION: As the keycap may fall out, when handling the keyboard always hold it by the
frame and do not touch the keycap.
1.
Turn the computer upside down
2.
Remove the Battery
3.
Loose the
screw
securing KB Holder.
•
M2.0x3.0B Flat BIND screws x2
4.
Upside down the computer.
5.
Open the display.
6.
Remove KB holder. Insert your finger into the slot between the KB holder and the
keyboard. Then, lift up the
keyboard holder
to remove it.
7.
Loose the
screw
securing KB screws.
•
M2.0x3.0B BIND screws x2
8.
Insert your finger into the keyboard slot and keyboard. Then lift up the keyboard to
remove it.
9.
Disconnect keyboard cable.
