Replacement Procedures
Satellite M300 and Satellite Pro M300 Maintenance Manual (960-Q08)
4-19
4.6 Memory
module
CAUTION: The power of the computer must be turned off when you remove a memory
module.
Do not touch memory module terminals. Any dirt on the terminals may cause
memory access problems.
Never press hard or bend a memory module.
Remove a memory module
To remove a memory module, confirm that the computer is not in boot mode. Then perform
the following procedure (See Figure4-6 and 4-7).
1.
Loose the
screws
which secure the
memory slot cover
.
•
2.5 x 4.0B
BIND screw
x3
2.
Remove the
memory slot cover
.
3.
Open the left and right
latches
and remove the
memory module
.
