Toshiba Satellite A350 Series Maintenance Manual Download Page 211

Page: 211 / 297

4 Replacement Procedures

Error! Style not defined. Error! Style not defined.

Satellite A350D Maintenance Manual

4-34

Installing the Touch Pad Bracket, LED board and Finger Printer Board

Install the touch pad bracket, LED board and Finger Printer board according to the following
procedures.

Seat the LED board and finger printer board in the correct position.

Seat the touch pad bracket over the LED board and finger printer board, then secure the
bracket with three M2x4 screws.

Downloaded from LpManual.com Manuals

Summary of Contents for Satellite A350 Series










































































































































































































































































































Search results

Summary of Contents for Satellite A350 Series

Reviews:

Related manuals for Satellite A350 Series

Brands by name

Popular brands

Toshiba Satellite A350 Series, Maintenance Manual

Search results

Summary of Contents for Satellite A350 Series

Reviews:

Related manuals for Satellite A350 Series

Brands by name

Popular brands