Toshiba SATELLITE 2610 Series, User Manual

Page: 120 / 208

User's Manual Setup and Password Security 8-29
Version
8
Last Saved on 19/09/99 14:08
Satellite 2610/2650 User's Manual – 08CHAP.DOC – ENGLISH – Printed on 19/09/99 as 08_261UK
How to reset the passwords
This section describes how to reset the supervisor and user password.
Supervisor password
1. Go to the DOS prompt, type in
SVPW
, and press
Enter
.
2. If the password has been registered, the following line will be displayed:
SUPERVISOR PASSWORD = Registered
Do you want to delete the supervisor password
<Y/N>?
3. Press Y to delete the password. The following line will be displayed:
Enter Password --->
4. Enter the currently registered password. The character string you
enter is displayed as a string of asterisks. For example, if you enter a
password consisting of four characters, the display is shown as:
Enter Password ---> ****
5. Press
Enter
. If character strings match, the password is registered and
the display changes to:
SUPERVISOR PASSWORD = Not Registered
If they do not match, the following message appears:
Password verify error!
Do you want to retry <Y/N>?
Press
Y
to return to step 3. Press
N
to return to DOS.
If you enter the password incorrectly three times, the screen will display:
Password access denied!
You will not be able to access the SVPW program. In this case you must
turn the power off and back on to retry the procedure.
6. Follow the same procedures described in the earlier section, How to
set the password, to set a new supervisor password.
After you register or delete a supervisor password, if you press the reset
switch before turning off the power, your latest supervisor password
setting will be cancelled.