manualshive.com logo in svg

Toshiba RSM 100, Instruction Manual, Page: 33 / 173

Share
Download
Toshiba RSM 100 Instruction Manual Download Page 33

 

⎯

 

32

 

⎯

 

 

6 F 2 S 0 7 1 5 

4.3  Operation of Record Menu 

In the on-line operation, record data stored in the relay can be extracted, displayed, saved in a 
record file and printed out. In the off-line operation, record data in the record file can be displayed 
and printed out. 

4.3.1 On-line 

Operation 

Click the 

[Record]

 button on the [Top menu] screen. The record data are extracted from the relay 

and the following record screen will appear. 

 

Depending on the relay model, the following record screen will appear. 

 

Fault record 

The [Fault record] screen will appear on the top of the record screens. 

The fault records are numbered in order of new to old. 1/4 displayed on the far left means that four 
fault records are saved and the latest fault record is displayed. Click the 

 or   button to display 

other records. 

Summary of Contents for RSM 100














































































































































































Reviews:

No comments