manualshive.com logo in svg

Toshiba RSM 100, Instruction Manual, Page: 2 / 173

Share
Download
Toshiba RSM 100 Instruction Manual Download Page 2

 

⎯

 

1

 

⎯

 

 

6 F 2 S 0 7 1 5 

Cautions for this Manual 

This manual describes the operating procedures of the PC interface software RSM100 (Relay 
Setting and Monitoring system). To ensure proper use of this software, please read this manual 
completely before use. 

•

  The contents of this manual are subject to change without prior notice. 

•

  This manual describes the functional details of the RSM100; it does not warrant fitness for any 

particular purpose. 

•

  The illustrations and screens shown in this manual may be emphasized, simplified, or partially 

omitted for convenience of explanation. The screens depend on the relay type and model. 

•

  The letters and positions of the parts in the screens in this manual may differ from the actual 

ones to avoid difficulties in understanding the functions and operations.  

•

  Copying or reproduction by any means of all or part of the contents of this manual without 

permission is strictly prohibited. 

•

  Neither we nor our dealers or distributors shall be held liable for any loss and damage due to 

wrong operations by users. 

Cautions for the Software 

Observe the following cautions to operate the software properly. 

•

  We shall not be held liable for the use and reliability of software supplied by other companies. 

•

  Making copies of this software, except for backup purposes, is strictly prohibited. 

•

  Carefully keep the CD-ROM on which the software is stored. 

•

  Reverse engineering, such as de-compiling and de-assembling, is strictly prohibited. 

  Allowing third parties to use all or part of this software by transfer, barter, or lease, without 

prior permission of Toshiba, is strictly prohibited. 

•

  The supplied media such as CD-ROM should be used for only the software. Selling the 

program in its original or modified from to third parties is strictly prohibited. 

Notations 

The following notations are used in this manual. 

Words in 

[

 (bold style) 

]

:  The words represent buttons on the screen. 

 

 

Example:  Click 

[OK]

 to proceed. 

Words in [ ]: 

The words represent menus, commands, files or boxes displayed on 
the screen or screen itself. 

 

 

Example 1:  Close the [Setting] menu. 

 

 

Example 2:  Enter a file name in the [Save as] dialog box. 

Words in “ ”: 

The words represent settings on the screen. 

 

 

Example:  Select “Operate” to record the event. 

Summary of Contents for RSM 100














































































































































































Reviews:

No comments