Toshiba RSM 100, Instruction Manual, Page: 19 / 173

⎯
18
⎯
6 F 2 S 0 7 1 5
Note:
If it cannot be connected though the same of the communication speed, set the
Flow control to ‘none’.
Your setting data can be saved in PC. If it cannot be written, set the “ini” folder under the installing
folder to be writable
When accessing with a modem via telephone line;
Choose [modem] when you access with modems. The window changes as follows.
Set the name of the connection, [Connection name], connecting telephone number, [Phone
number], device name/port number, [Connect using], communication speed of the serial port,
[Baud rate], and the dialing method, [Dial using].
[Connect using] automatically detects the name of your modem, but if it does not, check which
port your modem uses by opening the “Modems” in “Control Panel” of “My computer”. The
diagnostics tab of the “Modems” shows the relationships of your PC’s ports and devices. Then
select the COM port of your modem at the setting of the RSM100.
In addition, at most 64 settings can be stored by naming at [Connection name].