manualshive.com logo in svg

Toshiba RemotEye ESS, Instruction Manual

Share
Download
Toshiba RemotEye ESS Instruction Manual Download Page 32

 
 
 
 
 

26 

RemotEye® ESS Instruction Manual 

– 201791-002

 

Configuring EMD with Web Browser 

 

Initial Configuration 

The following will help you setup and configure the optional environmental sensor (EMD). The EMD device 
allows the user to monitor environmental temperature and humidity. It also has the ability to add two 
additional sensors that can be connected to its two digital inputs. The EMD can be mounted up to 100 
meters away from the RemotEye® ESS.

 

 

1.  Mount the EMD device to the desired location, and connect one end of the Cat 5 cable to the EMD 

communication port. 

2.  Connect the other end of the Cat 5 cable to the RemotEye® ESS EMD port. 
3.  Login as an administrator and go to the "Management" page under "Environmental Device" located in 

the side menu in the dashboard, and set EMD Setup to "Auto Enabled". Then click on the "Save" button 
to save the settings. 

Summary of Contents for RemotEye ESS























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands