1-1-2. HDD
1. Remove the top cover. (Refer to item 1-1-1.)
2. Peel off three tapes (1).
3. Remove four screws (2).
4. Disconnect the flexible cable (3) and the connector (4).
5. Remove four screws (5), then remove the dampers (7) and HDD (8).
Note:
• After replacing, attach the tape (1) to its original position.
Fig. 2-1-2
Damper (7)
Damper (7)
Damper (7)
Damper (7)
Damper (7)
Damper (7)
HDD (8)
Tape (1)
Tapes (1)
Screw (5)
Screw (5)
Screw (5)
Screw (5)
Screws (2)
Screws (2)
Flexible
cable (3)
Flexible
cable (3)
Connector (4)
Connector
HDD bracket (6)
Claw
