1-2-5. Front (R), Front (L/SW), Front (Jack) PC Board
1. Remove the front panel. (Refer to item 1-1-3.)
2. Remove four screws (1), then remove the stay (2).
3. Remove six screws (3), then remove the Front (Center) PC Board (4) and the Front (R) PC Board (5).
5. Remove two screws (6), then remove the Front (Jack) PC board (7).
4. Remove four screws (8), then remove the Front (L/SW) PC board (9).
Fig. 2-1-11
Screws (1)
Screw (3)
Screws (8)
Screws (6)
Stay (2)
Front (L) PC board (9)
Front (SW)
PC board
Front (R) PC board (5)
Front (Center)
PC board (4)
Front panel
Front (Jack)
PC board (7)
Stay
Fasten with
the tape.
Fasten with
the tape.
Wire
Front (L)
PC board
Front (Center)
PC board
Operation
panel door
Front (R) PC board
Front (Jack)
PC board
Fig. 2-1-12
Note:
• Fasten with the tape, taking care so that the wire does not hang over the tray door.