– 7 –
13-EN
14-EN
13
PRESET button
Press this button to change the operation mode
to the preferred operation mode memorized
previously. To memorize the operation mode,
press this button for at least 3 seconds during the
preferred operation mode. is displayed and the
operation mode is memorized.
14
SLEEP button
Press this button to start the OFF timer operation
that automatically adjusts the room temperature
and the fan speed.
You can select the OFF timer time from four
durations (1, 3, 5 or 9 hours).
15
COMFORT SLEEP button
Press this button to start the OFF timer operation
that automatically adjusts the room temperature
and the fan speed.
You can select the OFF timer time from four
durations (1, 3, 5 or 9 hours).
During group control operation, the set
temperature and the fan speed are not
automatically adjusted. Only off timer function is
activated.
16
QUIET button
Press this button to start quiet operation.
Pressing this button again will restore normal
operation.
■
Names and functions of
indications on wireless
remote controller
◆
Display
All indications, except for clock time indication, are
indicated by pressing the START/STOP
button.
10
7
5
4
6
9
8
1
2
3
• In the illustration, all indications are indicated for
explanation.
During operation, only the relevant indications will
be indicated on the remote controller.
1
Transmission
mark
This transmission mark ( ) indicates when the
remote controller transmits signals to the indoor
unit.
2
Mode
display
Indicates the current operation mode.
(A : Auto changeover control, : Cool, : Dry,
: Heat,
: Fan only)
3
Temperature
display
Indicates the temperature setting (17 °C to 30 °C).
When you set the operating mode to
: Fan
only, no temperature setting is indicated.
4
FAN speed display
Indicates the selected fan speed. AUTO or one of
fi
ve fan speed levels (LOW , LOW
+
,
MED
, MED
+
, HIGH
)
can be indicated.
Indicates
when the operating mode is :
Dry.
5
TIMER and clock time display
The time set for timer operation or clock time is
indicated.
The present time is always indicated except for
TIMER operation.
6
Hi POWER display
Indicates when the high power operation starts.
Press the Hi-POWER button to start and press it
again to stop the operation.
7
(PRESET) display
Indicated when memorizing the preferred
operation mode or when it has been memorized.
Also, this icon is indicated when the memorized
preferred operation is displayed.
8
(COMFORT SLEEP) display
Indicated during the OFF timer operation that
automatically adjusts the room temperature
and the fan speed. Each time you press the
COMFORT SLEEP button, the display changes
in the sequence of 1h, 3h, 5h, and 9h.
9
(QUIET) display
Indicated during the quiet operation.
10
Swing display
Indicated during the swinging operation where
the horizontal louver automatically moves up and
down.
NOTE
When both wired remote controller and wireless
remote controller are used, display on the screen of
wireless remote controller may differ from the actual
operation in some cases.
■
Preparation and check before
use
◆
Loading batteries
1
Remove the battery cover.
2
Insert 2 new batteries (R03 [AAA]) following
the (+) and (–) positions.
A
C
L
◆
Batteries
• To replace the batteries, use two new batteries (R03
[AAA]).
• In normal use, the batteries will last about one year.
• Replace the batteries if there is no receiving beep
from the indoor unit or when the air conditioner
cannot be operated using the remote controller.
• To avoid malfunctions by battery leakage, remove
the batteries when not using the remote controller
for more than one month.
1111056504_EN.indd 7
1111056504_EN.indd 7
9/22/57 BE 3:39 PM
9/22/57 BE 3:39 PM
