background image

– 9 –

17-EN

18-EN

4-4.  

How to use remote 
controller

 

Cooling / heating / fan only 
operation

 

Start

PRESET

MODE

TEMP

FAN

2

4

3

1

1

  START/STOP button ( )

Press this button to start the air conditioner.

2

  Mode select button (MODE)

Select Cool  , Heat  , or Fan only  .

3

  Temperature button (

TEMP

)

Set the desired temperature.
When the air conditioner is in FAN ONLY 
operation, the temperature display is not 
indicated.

4

  Fan speed button (FAN)

Select one of 

 LOW  , LOW

+

 

,

MED 

, MED

+

 

, HIGH 

.

• The   OPERATION lamp (green) on the display 

panel of the indoor unit goes on. And operation 
starts after approximately 3 minutes.
(If you select FAN ONLY mode, the unit will start 
immediately.)

• The   : Fan only mode does not control 

temperature.

• Fan speed 

 is the same as HIGH 

.

Therefore, perform only steps 

1

2

 and 

4

 to select 

this mode.

 

Stop

START/STOP button (

)

Press this button again to stop the air conditioner.

 

Dry operation

 

Start

PRESET

MODE

TEMP

FAN

2

3

1

1

  START/STOP button ( )

Press this button to start the air conditioner.

Mode select button (MODE)

Select DRY  .

3

  Temperature button (

TEMP

)

Set the desired temperature.

•  The fan speed display indicates 
•  

The 

 OPERATION lamp (green) on the display 

panel of the indoor unit lights, and operation starts 
after approximately 3 minutes.

 

Stop

START/STOP button (

)

Press this button again to stop the air conditioner.

 

Automatic operation 
(auto changeover)

 

Start

PRESET

MODE

TEMP

FAN

2

3

1

4

1

  START/STOP button ( )

Press this button to start the air conditioner.

2

  Mode select button (MODE)

Select A.

3

  Temperature button (

TEMP

)

Set the desired temperature.

4

  Fan speed button (FAN)

Select one of 

 LOW  , LOW

+

 

,

MED 

, MED

+

 

, HIGH 

.

• The   OPERATION lamp (green) on the display 

panel of the indoor unit lights. 
The operating mode is selected in accordance with 
the room temperature and operation starts after 
approximately 3 minutes.

•  If the “A” mode is uncomfortable, you can select the 

desired conditions manually.

 

Stop

START/STOP button (

)

Press this button again to stop the air conditioner.

 

Timer operation

Use the wired remote controller for timer setting if it is
also in use.

 

ON timer and OFF timer

PRESET

QUIET

SWING

TIMER

ON

FILTER

CHK

CLOCK

OFF

CLR

SLEEP

SET

FIX

Hi-POWER

COMFORT

SLEEP

MODE

TEMP

FAN

2

3

1

Setting TIMER

1

  Push ON / OFF TIMER button (

ON

 or 

OFF

) during 

operation.

Press the ON or OFF TIMER buttons as required.
•  The previous timer setting is displayed and 

fl

 ashes along with ON / OFF timer display.

Set the timer to the desired time.
Each press of the TIMER button changes the time 
in ten minute steps.
Pressing the TIMER button continually changes 
the time in one hour step.

2

 SET 

SET

 button

Press the SET 

SET

 button to set the timer.

The timer time is indicated and the timer starts.

Cancelling TIMER

3

 CLR 

CLR

 button

Press the CLR 

CLR

 button to cancel the timer 

setting.

1111056504_EN.indd   9

1111056504_EN.indd   9

9/22/57 BE   3:39 PM

9/22/57 BE   3:39 PM

Summary of Contents for RAV-SM307KRTP-A

























Reviews: