– 72 –
No.
Part name
Fan guard
Procedure
1. Detachment
1) Perform works of items 1 of
and 1 of
.
REQUIREMENT
Perform works on a corrugated cardboard,
cloth, etc. to prevent flaw on the product.
2) Remove the front cabinet, and then put it
downward on the floor.
3) Take off screws fixing the bell mouth.
(ST1T Ø4 × 8, 2 pcs)
4) Remove the bell mouth.
5) Take off the hooking claw of the fan guard
by pushing with minus screwdriver, etc.
2. Attachment
1) Insert the projection at upper side of the
fan guard into square hole of the dis-
charge port cabinet, and then insert the
hooking claw. Fix hooking claws while
pushing them (5 positions) with hands.
REQUIREMENT
Check that all the hooking claws are fixed
to the specified positions.
2) Attach the fan guard by hooking claws
(3 positions) at upper side of the bell
mouth to the square holes of the dis-
charge port cabinet.
3) After attachment, fix it with screws.
(ST1T Ø4× 8, 2 pcs)
Remarks
Discharge port cabinet
Take off screws (2 pcs)
Bell mouth
Discharge port cabinet
Minus screwdriver
Hooking claw
Discharge port cabinet
Square hole (3 positions)
Claw (3 positions)
Bell mouth
Fan guard
Bell mouth
