Notes :
1. Place the remote control where the indoor unit can receive the signal. This will
increase the accuracy of the timing between the remote control and the air
conditioning unit.
2. The ON/OFF timer can be set during the WEEKLY TIMER operation. In this
situation, the air conditioner will f rst follow the normal timer until it is complete;
then, it will return to the WEEKLY TIMER function.
3. During WEEKLY TIMER operation, all of operation such as MODE, TEMP,
FAN, Hi-POWER, ECO and etc., can be adjusted but when the clock reaches
the program setting, the operation will return to the set items in the program.
4. When the remote control is sending a signal to the air conditioner, avoid
interference from objects that can block the signal.
5. Press
to select desired operation.
or
to select desired temperature.
● The temperature can be set between 17°C and
30°C.
to select the desired fan speed.
8. Add operations, if required.
6. Press
7. Press
● Press
to use 8°C operation.
(Notes: Fireplace cannot select and memorize in
weekly function)
● Press
● Press
● Press
to use ECO operation.
to use Hi-POWER operation.
to use SILENT operation.
9. Adding or editing the program.
The program can be set to perform on all the required
days until
is pressed to conf rm the setting.
10. If adding or editing a program is required, please
repeat steps 2 - 8 before setting conf rmation.
11. After adding or editing, press
to conf rm the
setting*.
Operating Mode
Weekly timer running
Next program
Timer ON or OFF
Next operation
time
Operating Temperature
and Fan speed
Display after
pressing SET
button
*Point remote control at air conditioner receiving module
then, press SET button until you hear the “PiPi” sound.
This means the setting operation has been completed.
As the air conditioner is receiving the signal, you will hear
separate “Pi” sounds corresponding to the number of
days in the selected setting.
An incomplete setting is indicated if the TIMER lamp is
blinking. Press
twice.
- 57 -
