background image

2

Installation Manual

Outdoor Unit

1

  Precautions for safety

The manufacturer shall not assume any liability for the damage caused by not observing the 
description of this manual.
Be sure to read this installation manual carefully before installing.
The supplied CD-ROM contains the installation manual translated into many languages.
Recommend to the owner to perform maintenance periodically when using over long periods 
of time.
This appliance can be used by children aged from 8 years and above and persons with 
reduced physical, sensory or mental capabilities or lack of experience and knowledge if they 
have been given supervision or instruction concerning use of the appliance in a safe way and 
understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not be made 
by children without supervision.

Be sure to follow the precautions provided here to avoid safety risks. The symbols and their 
meanings are shown below.

 DANGER

It indicates that incorrect use of this unit can result in a high possibility of 
severe injury(*1) or death.

 WARNING

It indicates that incorrect use of this unit may cause severe injury or 
death.

 CAUTION

It indicates that incorrect use of this unit may cause personal injury(*2), 
or property damage(*3).

*1:  A severe injury refers to blindness, injury, burns (hot or cold), electrical shock, bone 

fracture, or poisoning that leaves after effects and requires hospitalization or extended 
out-patient treatment.

*2:  Personal injury means a slight accident, burn, or electrical shock which does not 

require admission or repeated hospital treatment.

*3:  Property damage means greater damage which affects assets or resources.

For general public use

Power supply cord of parts of appliance for outdoor use shall be at least polychloroprene 
sheathed flexible cord (design H07RN-F) or cord designation 60245 IEC66 (1.5 mm

2

 or 

more). (Shall be installed in accordance with national wiring regulations.)
This appliance is not intended for use by person (including children) with reduced physical, 
sensory or mental capabilities, or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance by a person responsible for 
their safety.
Children should be supervised to ensure that they do not play with the appliance.

1116691099_(01) EN.indd   2

1116691099_(01) EN.indd   2

9/22/15   5:59 PM

9/22/15   5:59 PM

Summary of Contents for RAS-2M14S3AV-E















Reviews: