7
11
6
14
5
9-4-3. Name and Functions of Indications on Remote Controller
[Display]
All indications, except for the clock time indicator, are displayed by pressing the button.
1
Transmission mark
This transmission mark indicates when the
remote controller transmits signals to the indoor
unit.
2
Mode indicator
Indicates the current operation mode.
(AUTO : Automatic control, A : Auto changeover
control, : Cool, : Dry, : Heat)
3
Temperature indicator
Indicates the temperature setting.
(17°C to 30°C)
4
Plasma
indicator
Shows that the electrical
plasma
purifying
operation is
in progress.
5
FAN speed indicator
Indicates the selected fan speed.
AUTO or five fan speed levels
(LOW , LOW
+
, MED
, MED
+
,
HIGH
) can be shown.
Indicates AUTO when the operating mode is
either AUTO or : Dry.
6
TIMER and
weekly
time
r
indicator
The time setting for timer operation
and weekly
timer function
is indicated.
The current time is always indicated except
during TIMER operation.
7
Hi-POWER indicator
Indicates when the Hi-POWER operation starts.
Press the Hi-POWER button to start and press it
again to stop the operation.
8
(PRESET) indicator
Flashes for 3 seconds when the PRESET button is
pressed during operation.
The mark is shown when holding down the
button for more than 3 seconds while the mark is
flashing.
Press another button to turn off the mark.
9
POWER-SEL
10
A, B change indicator remote controller
When the remote controller switching function is
set, “B” appears in the remote controller display.
(When the remote controller setting is “A”, there is
no indication at this position.)
11
Comfort sleep
Indicates when comfort sleep is activaled.
Press comfort sleep button to select function.
12
Quiet
Indicates when quiet is activated.
Press Fan button to start and press it again to select
other fan speed for operation.
13
Comfort Air flow
14
ECO indicator
Indicates
Air flow direction
Indicates the selected POWER-SEL level.
( 100%, 75%,
50%)
Indicates when the ECO is in activated.
Press the ECO button to start and press it again
to stop operation.
10
1
12
3
4
2
9 8
1
3
1
5
Silent operation
Indicates
the selected Silent 1 and Silent 2.
1
6
Fireplace operation
Indicates
the selected
Fireplace 1 and Fireplace 2.
1
5
16
Spot left
Spot right
Spot
center
Wide left
Wide
center
Wide right
FILE NO. SVM-17050
- 62 -
