Toshiba PQG30 User Manual Download Page 129

Page: 129 / 318

User’s Manual

6-3

Power

DC IN indicator

Check the

DC IN

indicator to determine the power status with the AC

adaptor connected:

Power indicator

Check the

Power

indicator to determine the power status:

Battery types

The computer has three types of batteries:

■

Battery pack

■

High Capacity Battery Pack (Option)

■

Real Time Clock (RTC) battery

If the battery becomes too hot while it is being charged, the charge will
stop and the

Battery

indicator will go out. When the battery’s temperature

falls to a normal range, charge will resume. This occurs whether the
computer’s power is on or off.

Blue

Indicates the AC adaptor is connected and
supplying proper power to the computer.

Flashing orange

Indicates a problem with the power supply. Plug
the AC adaptor into another outlet. If it still does
not operate properly, contact your dealer.

No light

Under any other conditions, the indicator does not
light.

Blue

Indicates power is being supplied to the computer
and the computer is turned on.

Blinking orange

Indicates power is being supplied to the computer
while the computer is in Standby mode. The
indicator turns on for one second and off for two
seconds.

No light

Under any other conditions, the indicator does
not light.

Summary of Contents for PQG30































































































































































































































































































































Search results

Summary of Contents for PQG30

Reviews:

Related manuals for PQG30

Brands by name

Popular brands

Toshiba PQG30, User Manual

Search results

Summary of Contents for PQG30

Reviews:

Related manuals for PQG30

Brands by name

Popular brands