Toshiba Portege R200 Maintenance Manual Download Page 48

Page: 48 / 346

2 Troubleshooting

2.3 Power Supply Troubleshooting

2-8

[CONFIDENTIAL]

PORTEGE R200 Maintenance Manual (960-519)

When icons are blinking, perform the following procedure.

Remove the battery pack and the AC adapter and cut off the power supply to the
computer by force.

Re-attach the battery pack and the AC adapter.

If icons are still blinking after the operation above, check the followings:

Check 1

If the DC IN icon blinks orange, go to Procedure 2.

Check 2

If the DC IN icon does not light, go to Procedure 3.

Check 3

If the battery icon does not light orange or blue, go to Procedure 4.

NOTE: Use a supplied AC adapter (G71C0001A310/A410, G71C0004A210) only.

Summary of Contents for Portege R200



























































































































































































































































































































































Search results

Summary of Contents for Portege R200

Reviews:

Related manuals for Portege R200

Brands by name

Popular brands

Toshiba Portege R200, Maintenance Manual

Search results

Summary of Contents for Portege R200

Reviews:

Related manuals for Portege R200

Brands by name

Popular brands