Toshiba Portege R200 Maintenance Manual Download Page 152

Page: 152 / 346

3 Tests and Diagnostics

3.20 ONLY ONE TEST

Subtest 03

GP Button

This subtest checks moving of the front operation panel button.

Press the Toshiba Presentation button after the following message appears.

Press [Toshiba Presentation button] button

Power switch

Toshiba Presentation

Toshiba Assist

Press the Toshiba Assist button after the following message appears.

Press [Toshiba Assist button] button

If the test ends successfully, the display returns to the ONLY ONE TEST

menu.

Subtest 04

Kill Switch

This subtest checks if the Wireless communication switch works properly.

If the test is started with the switch ON, following message appears in the
display.

Kill switch is set to a start position (OFF)

3-44

[CONFIDENTIAL]

PORTEGE R200 Maintenance Manual (960-519)

Summary of Contents for Portege R200



























































































































































































































































































































































Search results

Summary of Contents for Portege R200

Reviews:

Brands by name

Popular brands

Toshiba Portege R200, Maintenance Manual

Search results

Summary of Contents for Portege R200

Reviews:

Brands by name

Popular brands