Toshiba Portege R200 Maintenance Manual Download Page 206

Page: 206 / 346

3 Tests and Diagnostics

3.29 SETUP

3-98

[CONFIDENTIAL]

PORTEGE R200 Maintenance Manual (960-519)

(b)

HDD Priority

Set the priority of the HDD as a startup device.

Built-in HDD

→

USB

The priority is set as built-in HDD

→

USB (Default)

USB

→

Built-in HDD

The priority is set as USB memory

→

built-in HDD.

Display

This group of options configures the computer’s display.

(a)

Power On Display

This option is used to select the display when booting up.

Auto-Selected

Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)

LCD+AnalogRGB

Selects both the internal LCD and the external monitor

for simultaneous display.

NOTE: When starting the computer in Resume mode, the last configuration is

remembered. If data does not appear on the display you are using after starting
in Resume mode, pressing

Fn+F5

Pressing

Fn+F5

changes the display setting as follows in order: the internal

LCD, the external display, both the internal LCD and the external display.

When an external display, which does not support SVGA mode is connected and

“LCD+AnalogRGB”

is selected, the external display is not displayed.

(b)

LCD Display Stretch

LCD Display Stretch enables or disables a larger display area of the screen.

Enabled

Enables the LCD display stretch feature. (Default)

Disabled

Disables the LCD display stretch feature.

Summary of Contents for Portege R200



























































































































































































































































































































































Search results

Summary of Contents for Portege R200

Reviews:

Related manuals for Portege R200

Brands by name

Popular brands

Toshiba Portege R200, Maintenance Manual

Search results

Summary of Contents for Portege R200

Reviews:

Related manuals for Portege R200

Brands by name

Popular brands