Toshiba Portege R200, Maintenance Manual

Page: 68 / 346

2 Troubleshooting 2.4 System board Troubleshooting
2-28 [CONFIDENTIAL] PORTEGE R200 Maintenance Manual (960-519)
Table 2-4 D port status (8/8)
LED Status Test item Message
HW initialization prior to boot, Waiting for the
completion of HW initialization
Notifies the DVI connection status to VGA BIOS (DVI
supporting model)
Setting of battery save mode
Setting of date
Waiting for completion of Bluetooth initialization
(model supporting Bluetooth)
Update of DMI Wakeup factor, Update of SM-BIOS
structure table
Closing PCI device configuration space
Cache control
Process related to CPU
Making the CPU clock to be set by SETUP
Waiting for completion of motor-off of disabled HDD
Final decision of FDD information
Post-process of PRE_BOOT_SETUP
Clearance of PWRBTN_STS
(F11FH)
Enabling POWER Button
Clearance of IRT status F121H
Updating checksum for Runtime
FFFFH
Check 1 If the D port status error code F11DH or F11FH is displayed, go to the 1.8” HDD
Troubleshooting Procedures in Section 2.6.
Check 2 If any other D port status error code is displayed, perform Procedure 3.
D port error statuses are following:
Error code Contents
F003H or F004H Error of security initialization
F00BH Prohibition of BIOS renewal
F117H Exception check error
F120H Error of Setting clock generator
F122H Logo display error