manualshive.com logo in svg

Toshiba Portege R200, Maintenance Manual

Share
Download
Toshiba Portege R200 Maintenance Manual Download Page 124

3  Tests and Diagnostics 

3.6  System Test 

3-16 

 [CONFIDENTIAL] 

 

PORTEGE R200 Maintenance Manual (960-519) 

Subtest 03 

Geyserville 

If the CPU supports Gerserville (SpeedStep), this Subtest checks that the CPU 
operating clock speed can be changed.

 

Subtest 04 

Quick Charge 

This subtest checks the status for the quick charge. 

Subtest 05 

DMI read 

This subtest displays the information in the Flash-ROM in the following 
format. 

*** DMI Data Display Ver X.XX *** 

Model 

Name 

  : 

XXXXXXXXXXX 

Version Number 

: XXXXXXXXXXXX 

Serial Number  

: XXXXXXXX 

Model Number   

: XXXXXX-XXXXX 

PCN/BND Number 

: XXXXXXXXXXXX/XXX 

UUID Number 

 

: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 

Press [Enter] to EXIT 

To exit this subtest and return to the SYSTEM test menu, press 

Enter

.

Summary of Contents for Portege R200



























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands