Toshiba PERCEPTION e User Manual Download

Page: 54 / 57

To Record a Message:

1. Call up the message that you

want to add to or change.

2. Press the

button to access

alpha characters.

3. Press the

button to move the

cursor (–) to the desired
position.

4. Press the button

corresponding to the letter
which you want to enter.

5. If you want to enter a number,

press the

button to change

to numeric characters. Press
the

button again to return to

alpha characters.

will remain at your station until canceled. It will then be erased and the
original programmed message will be restored.

Use the following procedure when adding to a preprogrammed message
or when leaving a new message:

(See To Leave a Message.)

(Refer to the figure on the following page for an explanation of the
dialpad buttons.)

(The left edge of the display to program a new message, or two spaces
to the right of the preprogrammed message to add information.)

Use the

button to shift from letter to letter on that button. For example:

■

If you press

, a D will be displayed. By pressing

, the D will change

to E. By pressing

again, the E will change to F. Press

again and

the F will change to D.

■

To enter spaces, press

Numbers are also entered on the dialpad.

ABC

DEF

GHI

JKL

MNO

PRS

TUV

WXY

button moves

cursor to the right
(also used to
access special
characters)

button moves the

cursor to the left

button is used to shift between

the three letters on each alpha button
(also used to access special characters)

button alternates

between alpha
and numeric
characters

Each button has three letters that
are used in messaging; the

button

is used to shift between the letters

DIGITAL TELEPHONE

PERCEPTIONe

Summary of Contents for PERCEPTION e


























































Search results

Summary of Contents for PERCEPTION e

Reviews:

Related manuals for PERCEPTION e

Brands by name

Popular brands

Toshiba PERCEPTION e, User Manual

Search results

Summary of Contents for PERCEPTION e

Reviews:

Related manuals for PERCEPTION e

Brands by name

Popular brands