To Park a Call:
1. Press the
PARK
button, or
press the
CONF/TRNS
button
and dial the access code (
* 3
))
_____.
2. Hang up or dial another call.
To Reconnect a Parked Call:
1A. Lift the handset.
... or ...
1B. Press the
DN
button (this is
necessary only for calls which
are parked on a DN other than
the primary DN).
2A. Press the
PARK
button or dial
the access code (
* * 3
) _____.
To Hold a Call:
1. Press the
HOLD
button.
2. Hang up.
CALL HOLD AND TRANSFER
CALL HOLDING
Call Park and Call Hold are two methods of holding calls. The Call Park
(
PARK
) button allows you to originate and receive calls on the
DN
button
once the call was parked (on hold). If you do not return to the parked call
within a designated time period, your telephone will ring to recall you.
The Call Hold (
HOLD
) button causes the
DN
button to become busy, but
a held call will not recall you.
The PARK LED will light (only if the
PARK
button is equipped). The DN
LED will indicate the In-use status (unchanged). The Park connection will
be placed on hold, and you will hear dial tone.
The primary DN LED will indicate the In-use status, and you will hear dial
tone.
The DN LED will indicate the In-use status, and you will hear dial tone.
The PARK LED will go out, you will no longer hear dial tone, and you will
be reconnected. The primary DN LED will indicate the In-use status
(unchanged).
The DN LED will change from In-use to On-hold status, and the
connection will be placed On-hold.
DIGITAL TELEPHONE
PERCEPTIONe
&
ex
18
