Toshiba PERCEPTION e User Manual Download

Page: 26 / 57

Terminate the Existing Call:

1. Hang up.

To Accept the Waiting Call While
Holding the Existing Call:

1. Press the

CWT

button, or

press the

CONF/TRNS

button

and dial the access code (

# 4

)

_____.

To Return to the Original Call:

1. Press the appropriate

button.

To Disconnect One Call and
Remain Connected to the Other
Call:

1. Hang up while connected to

the call that you want to
terminate.

2. Press the

button.

To Accept a Camp-on Call:

1. Complete the original call and

hang up.

2. Answer the new call.

The CWT LED will go off, and the new call will ring your prime DN in the
usual manner.

The CWT LED will light steadily, the DN LED will indicate the On-hold
status, and you will be connected to the waiting call.

The CWT LED will flash, and the DN LED will indicate the In-use status.

NOTE: It is possible to alternate between the two calls indefinitely by
selecting either the

CWT

button or the

button.

The remaining call will appear in the hold condition at the

button.

You will be connected to the remaining call.

NOTE: Camp-on and Call Waiting are mutually exclusive.

CAMP-ON CALLS

A short warning tone from your telephone’s speaker (while you are
talking with someone) advises you that an incoming call has been parked
at your station.

Your telephone will ring, and the DN LED will flash.

DIGITAL TELEPHONE

PERCEPTIONe

Summary of Contents for PERCEPTION e


























































Search results

Summary of Contents for PERCEPTION e

Reviews:

Related manuals for PERCEPTION e

Brands by name

Popular brands

Toshiba PERCEPTION e, User Manual

Search results

Summary of Contents for PERCEPTION e

Reviews:

Related manuals for PERCEPTION e

Brands by name

Popular brands