Toshiba PERCEPTION e Page 12 User Manual Download

Page: 12 / 57

4. Dial the number to be stored

(16 digits maximum).

5. Press the

SDC

button.

6. Record the Speed Dial-Station

address code and telephone
number for future reference.

To Use Speed Dial-System:

1. Lift the handset.

2. Press the

SDS

button or dial

the access code (

# 6

) _____.

3. Dial the Speed Dial-System

address code (10 ~ 99).

To Store or Change a Telephone
Number:

1. Notify the attendant.

NOTE: It may be necessary to insert a pause to allow for dial tone delay.
To enter a pause, press the

button after the trunk access code.

The SDC LED will go out, and the number will be stored.

SPEED DIAL-SYSTEM

As many as 90 telephone numbers can be stored in the Speed Dial-
System directory.

You will hear dial tone.

The SDS LED will flash.

The system will dial the stored number.

(The Speed Dial-System directory is controlled by the attendant console.)

NOTE: In a consoleless operation, the Speed Dial-System is set and
changed via the programming terminal (TTY connection).

CALL FUNCTIONS

AUTOMATIC CALLBACK

If you attempt to call another station or access a trunk and receive a busy
tone, you can request to be signaled when the desired station or trunk is
idle. You may continue to use your telephone in the usual manner while
awaiting a callback.

DIGITAL TELEPHONE

PERCEPTIONe

Summary of Contents for PERCEPTION e


























































Search results

Summary of Contents for PERCEPTION e

Reviews:

Related manuals for PERCEPTION e

Brands by name

Popular brands

Toshiba PERCEPTION e, User Manual

Search results

Summary of Contents for PERCEPTION e

Reviews:

Related manuals for PERCEPTION e

Brands by name

Popular brands