manualshive.com logo in svg

Toshiba PERCEPTION 4000, User Manual

Share
Download
Toshiba PERCEPTION 4000 User Manual Download Page 48

To Transfer a Waiting Call:

1. Establish a two-way

connection.

2. After hearing the Call Waiting

tone, press the SWAP access
key.
. . . or . . .
Press the CONF/TRNS key
and enter the Swap access
code. 

3. Press the CONF/TRNS key

and dial the number of the
station that is to receive the
new call. 

4. Hang up; or wait until the party

answers, announce the
transferred call, and then hang
up. 

2. You cannot hold code calls, paged calls, dictation machine calls, or

calls from an attendant.

3. You will not receive a Call Waiting signal if you are currently on hold

at another station; performing a call transfer; connected to an
attendant, dictation machine, or voice mail system; involved in an
Attendant Override; or involved in a conference. You will also not
receive a Call Waiting signal if your station is programmed for Data
Security or Data Privacy. This prevents the interference of tones
during data transmission.

4. You cannot form a three-way conference with the originally-held

party and the new call.

CALL WAITING TRANSFER

The Call Waiting Transfer feature allows you to place a current call on
“soft hold” to answer a waiting call, and then transfer the new call to
another station.

Your current call will be placed on “soft hold” and you will be connected
to the new call. 

Listen for ringback tone. 

Your original call will recall your station. 

NOTES:

1. You cannot place calls to a paging device or dictation machine, or

calls to/from an attendant, on hold.

PERCEPTION 4000

FEATURE OPERATION

4-20

Summary of Contents for PERCEPTION 4000





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands